Physical Port
2-port 10/100/1000BASE-T RJ45 with auto MDI / MDI-X function
2-port SFP, supporting 100/1000/2500BASE-X transceiver type auto detection
 
Fiber Port Redundancy
Automatically detects link status and redundancy on dual ports with the same connector type.
Only primary port is active at a time, while the backup port is blocked.
When primary port link failure occurs, the traffic will swap to back up port automatically.
Once the primary port status is back to link up, the traffic will swap from backup port to primary port.
 
Layer 2 Features
Supports auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
High-performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
9K jumbo frame size support
Integrated address look-up engine, supporting 4K absolute MAC addresses
Automatic address learning and address aging
 
Industrial Case and Installation
Slim IP30 metal case protection
DIN-rail, wall-mount or side wall-mount design for redundant power design
Redundant Power Design
12 to 48V DC, redundant power with reverse polarity protection function
AC 24V power adapter acceptable
Supports 6000 VDC Ethernet ESD protection
-40 to 75 degrees C operating temperature